LMS Class 5 (Black Five) 4-6-0
LMS Class 5 (Black Five) 4-6-0 (Locoman)
Superior Steam sounds for the Hornby Black Five 4-6-0
Now with 'All New' interactive features
***IMPORTANT: All sound decoders we recommend be sent Insured special delivery***
Function Key .
F0 Lights On/Off. (If fitted)
F1 Sound On/Off.
F2 Short Double Whistle. (Shunting)
F3 Short Single Whistle. (Right away Whistle)
F4 Uncoupling Mode including coupling hook sounds.
F5 Long Whistle.
F6 Drivers door open/close.
F8 Long Whistle with Echo.
F9 Wheel Slip.
F10 Despatch Whistle.
F11 Firebox Open/Close.
F12 Coal Shovelling On/Off.
F13 Tender Water Filling.
F14 Safety Valves.
F15 Sound Fade Out/In (Tunnels Etc)
F16 Shunting Mode. (Inc Drain Cocks & Light Chuffs)
F17 Speaker Volume. (Decrease/Off)
F18 Speaker Volume. (On/Increase)
F19 Aux 1.
F20 Aux 2.
Project includes random stationery sounds including Injector & Coal Shovelling.
NOTE: All SugarQube & Slab Bass Reflex Speakers are 8 Ohm's and should always be wired in Parallel
See the LMS Class 5 in action - https://www.youtube.com/watch?v=l-hczOnUrBA
WHEN ORDERING PLEASE NOTE:
Newer Hornby models have the DCC Plug and Speaker housing in the Tender, this is ‘NOT’ the best speaker for this locomotive. ALL earlier models have the 8 Pin Plug
In the locomotive giving limited room for decoders & speakers, we offer below options for both models with 2 Pin, 4 Pin & 6 Pin Micro Harnesses.
EARLY MODEL: 4 Pin Harness: This allows the 8Pin plug in the loco to be removed, this using the 2 outer wires for pickups & the 2 inner wires for the motor, allowing decoder+ speaker fitting in the tender.
EARLY MODEL: 6 Pin Harness: As above but the 5th & 6th wire for a 8ohm Sugarcube in the loco.
CURRENT MODEL: 2 Pin Harness: This allows for Sugarcube speakers to be put in the loco along with speakers in the tender.
IMPORTANT: 2 X 8 Ohm Sugarcubes should be wired in Parallel, and if 2 x 4 Ohms speakers are used, these must be wired in series. (ALL SUGARCUBE SPEAKERS ARE 8 Ohms)
Special Delivery is available on this product. Please choose this option in your basket if required.
|EARLY OPTION 8Pin Decoder + 8Ohm Standard Sugarqube Spk||£102.08 (£122.50 inc VAT)|
|EARLY OPTION 8Pin Decoder + 2 X Sugarqubes + 2 Pin Harness||£104.17 (£125.00 inc VAT)|
|CURRENT MODEL 8Pin Decoder + 28mm Speaker||£98.75 (£118.50 inc VAT)|
|CURRENT MODEL 8Pin Decoder+8 Ohm Bass + Sugarcube + 2 Pin Harness||£118.75 (£142.50 inc VAT)|
|EARLY OPTION 8Pin Decoder+8 Ohm Bass + Sugarcube + 6Pin Harness||£118.75 (£142.50 inc VAT)|